简体中文
ENGLISH 
русский
Le français
España
Service
Service Center
Opaly® Solid Surface and Quartz Stone
A security attachment must be used:
Breathing dust mask / earplugs, safety glasses / steel rubber boots / waterproof aprons / gloves
All electrical applications must be ground fault circuit breakers
Keep the work area clean, messy areas and benches can cause accidents
The passage should be at a safe distance from the work area.
The following guidelines should be followed to ensure high quality products:
Visually inspect the panels prior to processing to ensure that the panels are color matched.
Do not re-polish, sand, or other method to change the original surface finish of the board.
Storage:
Plates must be stored in a manner that prevents warpage. Need to be stored on a flat platform or stored vertically so that the product minimizes warpage. Sheets must always be stored in such a way that the polished surface is not exposed to the sun, and should not be exposed for too long in hot weather and cold winters in harsh weather conditions.
Cutting: To avoid overheating of the sheet, using watering tools is requested. The water flow should be consistent to ensure that the blade is sufficiently cooled. Do not cut the square corners (cross cut) as this will create stress points in the sheet and may cause the sheet to crack. When cutting the internal angle, always use the core drill to avoid damaging the corner area of the cutting disc, creating a pressure point at the sharp inner corner.
Cuts: For square cuts in sinks and cooktops, always make cuts at the four corners. All cuts should be performed using a diamond cutting tool only in the case of watering to avoid excessive heat generation, which may also cause hairline cracks. It is recommended that the edge profile and the top and bottom of the slit have at least a 1/8" radius or chamfer.
Seams: The surface to be stitched must be unpolished, flat, dry and clean. All joints should be made uniform by adjusting the material before the adhesive solidifies.
◆Never place seams over the dishwasher or in the middle of opening.
◆There should be no seams on the peninsula or the overhang of the island.
◆A notch or grinding groove along the edge of the sheet portion or the laminated edge to be stitched can be used to reinforce the bond, always bonding the seam in a dry environment, they should fit snugly, span the seam from front to back and in the joint The length of the slit is kept horizontal.
◆Apply tape to the quartz surface in the seam area of the two parts, a professionally formulated adhesive and follow the recommendations for proper use of the adhesive are requested.
◆The adhesive is applied to both sides of the slit of the plate/component by hand and the adhesive is applied over the entire length and thickness of the seam area.
◆The clamping system should be held for at least 30 minutes until the adhesive is completely hardened over the entire length of the joint or as recommended by the manufacturer.
Beveled: The bevel should be angled at 45° to ensure maximum strength. The joints should be clean, flush and parallel. Please note that the bevel has the biggest weakness and is the most vulnerable. Our recommended minimum edge profile is 1/8" bevel or rounded corners. Ensure that the adhesive is fully distributed throughout the joint for maximum strength.
Lamination/bilateral: The laminate strip is cut from the same sheet as the countertop. When laminating, it is important to ensure that the laminate is the full length of the top member and cut at 45° at the outer corners. A notch or grinding groove along the edge and a table panel to be sewn can be used to enhance adhesion. The proper distribution of the adhesive is important for visual quality and seam strength.
Sink/cooktop installation: All under-mount sink cut-out must be polished to match the countertop surface. All sinks installed under the counter should be sealed to the countertop with 100% silicone. Be sure to use a professional sink holder or support rail system. When installing the sink and cooker, make sure they do not put pressure on the cut. It should be installed according to the recommendations of the fixture manufacturer. Do not attach mechanical fasteners (screws, nails, etc.) directly to the material. All cast iron sinks (top or bottom mount) must be supported below the cabinet. Under no circumstances should anchors be mounted to the quartz surface.
Opaly® Solid Surface – Basic Fabrication Guidelines:
◆Easy to handle and fabricate
◆Can be cut and joint with carpentry tools and equipment
◆Seamless joint
◆Can be bent into different shapes after heated in oven
◆Can be sand blasted and making inlays in the material
◆Complicated designs can be achieved by mold
Cutting: can be cut easily with a cutting machine.
Open holes: faucet hole, pipe hole, cut-out for sink and stove can easy be made by a drilling machine or cutting machine.
Edge profile: Different edge profile can be realized by using different router bits.
Joint line: Opaly® solid surface can be joint seamless with sink, basin and plash by using the same color of glue.
Sanding: sanding can be done by sanding machine or portable sanding machine, start with dry sanding to wet sanding.
Use the sanding paper from rough to fine by 120#、180#、320#、400#、600#、1000#、1200#、1400# grit.
Polishing: After the surface is flat and smooth, buff the face with wool pad and wax, surface will be as bright as a mirror.
Fabrication Center
In order to better serve domestic and foreign customers, Opaly® has established eight fabrication centers throughout the country to process Opaly® products. All fabrication centers use the world's advanced artificial stone countertop engraving and cutting technology equipment, with professional technical level, to provide more humanized solid surface & quartz stone products, so that your home space dreams come true.
Quartz stone and solid surface products in the machining center include:
Ordinary countertops: cabinet countertops, bathroom countertops, window sills, dining tables, commercial desks, reception counters, writing desks, computer desks, bar counters, etc.
Hospital countertops, laboratory countertops: solid surface is excellent in acid and alkali resistance, easy to clean and care, no gap bacteria have nowhere to hide, and is widely used in hospitals and laboratory countertops and other important occasions to meet the requirements of aseptic environment.
Opaly® solid surface and quartz stone materials have the unique advantages of rich color and stable color. They are easy to be polished, clean and hygienic, strong in plasticity, repairable and seamless. Available in a variety of colors. In all kinds of hotels, banks, offices, restaurants, guest rooms, bathrooms, kitchens and other design, gorgeous and elegant, reasonable layout, creating a wide use of space and perfect decorative effects, so that your life into a harmonious color, feel warm.
Opaly® makes home more beauty!
Processing plant
Processing table
Most stains do not pose a threat to Opaly® solid surface material
Most of the stains such as food, cooking oil, soy sauce, vinegar, alcohol, iodine, citric acid, lipstick, shoe polish, ink, etc. do not pose a threat to the Opaly® solid surface. They are durable and easy to maintain without waxing, saving costs.
Daily cleaning and maintenance
Water stains or small amounts of stains can be removed immediately with a damp cloth and a small amount of household cleaner or soapy water.
Severe stains or scratch
It can be removed by wiping with household decontamination powder and melon cloth. The more tenacious stains can be removed by fine sandpaper (180~400). Once again, wipe it with water with melon cloth to maintain its surface glossy.
Strong stains, cigarette burns or small cuts
Use sandpaper with water to remove stains or cuts and polish with a polisher.
Excellent product quality plus satisfied sales service, Opaly® has got greatest reputation / honor both in domestic and oversea market.
Ten year quality assurance
All Opaly® Products produced or fabricated by approved fabricator are provided 10 years warranty.
Occupational Health and Safety Management System Certificate
Occupational Health and Safety Management System Certificate
Certificate of High-tech Enterprise
Certificate of High-tech Enterprise
IS014001 Certificate
IS014001 Certificate
Patent Certificate of Plate Reversing Discharger
Patent Certificate of Plate Reversing Discharger
Patent Certificate of Plate Transfer Manipulator
Patent Certificate of Plate Transfer Manipulator
Patent Certificate of Semi-automatic Gating Machine
Patent Certificate of Semi-automatic Gating Machine
Patent Certificate of Automatic Casting Machine
Patent Certificate of Automatic Casting Machine
Patent Certificate of Pressure Decompression
Patent Certificate of Pressure Decompression
Greenguard Certificate
Greenguard Certificate
ISO Certificate
ISO Certificate
NSF Certificate
NSF Certificate
SGS Certificate
SGS Certificate
Artificial Stone Association
Artificial Stone AssociationFeedback
Message
Contac us
Information
Sales Center
Guangdong Opaly® New Material Technology Co., Ltd
Room 1218, #2 Building, Zone 9, Aoyuan Chengshi Tiandi, Hanxi Dadao East, Panyu District,Guangzhou Guangdong 511495 China.
Phone：+86-20-8154-5930
Production base 1
Foshan Opaly® Composite Materials Co., Ltd.
No.12-3, A area, Jingkou Park, Central Science and Technology industrial Zone, Sanshui District, Foshan, Guangdong P.R. China 528145.
Phone：+86-757-8721-9386
Production base 2
Yunfu Opaly New Materials Technology Co.,Ltd
Road No.3, Dawan Industrial Transfer Park, YuNan, YunFu, Guangdong China
OPALY® Make Home More Beauty
Official public number
